Good Morning Folks! I hope you all had a wonderful Thanksgiving break if you celebrated it. I had a decent enough day but it pretty much wore me out completely. I am still fighting some illness and I have a doctors visit scheduled for in the morning where I am hoping going to get some help. I feel like I have something akin to “walking” pneumonia because I can function well enough… but just have zero stamina and devolve into coughing fits on the regular. We did not record AggroChat yesterday in part due to we were down a bunch of folks, but on my side… because I did not really feel like pushing it. Suffice to say that Friday when I set up my brand new 3D Printer… it took multiple passes before I had the stamina to get everything done. In truth I had done 90% of the things in a single pass, and had I ONLY dealt with the printer I would have probably been fine. However before hand I set up my last of my shelving units, and routine the power cord for the printer over the top of the door leading into the house from the garage. So by the time I actually got around to unpacking the unit I was already running low on juice.
I partook of one of the recent deals through Bambu Labs where I got their P1S printer, the AMS 1.0, and a couple of partial spools of filament for roughly $500. I realize that the P1S has recently been replaced by the P2S, and the AMS has also recently been replaced by a newer AMS 2.0 model. However I figured this was a good set up to get me started in my adventures in FDM printing. Truth be told I had been researching different printers for the better part of the last year, and this setup appeared to be the least painful and was as close as you could get to a truly out of the box turnkey experience. Truth be told other than a few hiccups where connectors popped off during assembly, and a single jam feeding filament with the AMS, it has been a pretty flawless experience. I would absolutely recommend this setup for anyone wanting to dabble in such nonsense.
As is fortold by the printer gods… the first print is required to be a Benchy. It also ships with the printer on the SD Card and was readily available. By around 2pm on Friday afternoon I had printed it out and for the most part everything seemed to be working just fine. This was with the default settings and long before I had dabbled in installing Bambu Studio or tweaking any of the parameters. My second print was a scraper, which honestly I am not sure if I am actually going to use because I am not too keen on metal blades on my textured printing plate. Instead after a bit of research I picked up some plastic razor blades which arrived yesterday and are seemingly going to work beautifully without leaving any scratches. I am well and truly knee deep in the eternal scope creep of hobbies, and I have a cooking torch on its way arriving today so I can burn away stringing when it happens.
The third print was a model designed by Miscast that is part of his permadeath vlog series. The models he has been releasing as part of this series are specifically designed to be a bit chunky so that you can print them without much issue on an FDM printer. For most miniature scale printing you really need resin printers, which is a thing that I am planning on getting into at some point but figured FDM was the better starting place. I attempted to use some of the auto settings in Bambu Studios, and was the first time That I actually laid parts out myself on the plate… and lets just say… it is also the model that made me realize I was going to need to start tweaking some of the settings. This is absolutely usable, especially when you consider that it is largely designed to be a base for kit-bashing… which is going to require a lot of post processing anyways.
So what did I do? Jump into my most ambitious print yet of course. This represents a plate of legally distinct Not-Space-Marine Not-Space-Wolf chapter base toppers. I cranked up the quality as best I could and let these stew for 14 hours, as effectively the last thing that I printed on Saturday. While they need some cleanup, and removing some support material that I had to add to deal with some of the floating aspects of a few of the designs, I think they are absolutely serviceable for the purpose of miniature bases. I printed off 25 of these in total, and for the most part I am pretty happy with them. Again I will absolutely spend a bit of time fiddling with them and smoothing out a few spots where there are textures that I did not want but they should paint up just fine when an official GW Space Marine is standing on top of them.
The first print of the day on Sunday was a set of filament clips, because I had ordered some specific colors of filament for the next big project. After doing a bunch of research I landed on this design which seems to work beautifully. Essentially I needed to eject the lime green and neon orange filament that the unit came with, so that I could load up new spool of SunLu Matte Green, and SunLu Matte Red high speed PLA. I put the other green and orange in baggies and put dessicant sachets in there as well, which is a thing that I am going to need to start saving from pill bottles. In theory you need to keep your Filament as dry as possible, and while we do not really struggle with high levels of humidity that often, apparently once it goes bad it stays bad and there is not much you can do to save it. There is a whole system that you can print out to put in the AMS 1.0 to solve this problem, which I will spend some time doing at some point.
The next project is something that I had seen somewhere along the way either on Instagram or Facebook or something of the sort. Essentially someone had the idea of making a “Lego” Christmas Wreath, and within a few minutes of searching I found several sources. I largely wanted the most simplistic design that only used the “leaves” and the 1 unit caps as berries. First off I have to say how much I love the fact that this printer has a camera. Sure I wish it transmitted at a reasonable framerate… but just having some ability to check in on your print is phenomenal, especially since I am usually upstairs in my office and the unit is humming away on a workbench out in the garage. My sibling Ace has been living vicariously through me and I have been flooding their messages with lots of progress shots as we went along.
The leaves came out beautifully and each one of them took about an hour and a half to print at the ttweaked settings that I had finally landed upon. I am not sure how much is the settings that I tweaked and how much is the fact that I swapped filament, but so far I really like the Sunlu stuff. I got it purposefully since I had heard lots of good things from folks about it specifically, and so far I agree with their assessment. It is cheap enough at $14 per 1kg spool, and in printing off six of these I barely made a dent in the spool as a whole. It took around and hour and a half for each leaf to print, and then some additional time to let the plate cool down to around 35c so I could remove it without fear of anything warping. Over the course of the day I printed all six leaves required to make the wreath and then set up a plate full of the 1x caps in Red filament to churn away while I slept.
When I got up and around this morning, I dry fit everything together and this is the result. I am not 100% sure if I like the arrangement of the caps yet, but I am pretty happy with the end product. There was some stringing down inside the red caps but it isn’t noticeable at all since they are going to get seated down on top of the leaves. I’ve heard that Plastruct works beatifully as a solvent glue to weld together PLA and I am contemplating a trip down to a local hobby shop to see if they have any over lunch. I would probably try it first with the Miscast limo to glue it up and make sure it did not destroy everything in the process, before touching this effectively final and perfect print. I could always use CA/Super glue, but I have always preferred “welding” plastic together when an option, and would love to find a viable solution for that with the ubiquitous nature of PLA.
Today however I need to sort out a better system for poop management. Essentially each time the unit clears the extruder head or switches filament color… it poops out a little bit of material down a chute in the machine that leads to it just sort of spilling out randomly onto my workbench. There are dozens of different systems that people have devised, but I am going with effectively a pretty straight forward bin that just sits up against the back of the machine to catch things as they drop out. I am holding onto this for the moment because if Plastruct works… I might try and create some sort of equivalent of “sprue glue” with it for smoothing out rough surfaces similar to how you can use it for gap filling styrene models. These remnants will also be great for testing with just to see how it works. However I did have the funny idea that if you had enough of these, they would probably make a great replacement for packing peanuts.
That was my weekend and my first steps into the 3D Printing world. Expect to see more of this nonsense in the coming weeks, and at some point I fully expect to get into resin printing as well.
The post Adventures in Plastic Poop appeared first on Tales of the Aggronaut.
Good Morning Folks. Once a week, Ace and I get together to do Grandmaster difficulty content in Destiny Rising. In general we have had much better luck when we queue together for content, because at a minimum we know that we can rely on each other. This week however is pure butts when it comes to options. For those who have not gotten to this point yet, you are limited in your character options when it comes to Grandmaster activities and everyone has to choose one of six characters that is also over 64k power rating. Really of the options there viable ones are Rossi, Ning Fei, Gwynn, and Jolder. Of those generally the strongest characters damage output wise are Ning Fei and Gwynn… but both of them are very much glass canons that have to get up close and personal with mobs in order to deal the maximum amount of damage.
We started the night with Blitz and I decided to roll with Gwynn and Ace with Ning Fei because they were our strongest options… and quite possibly it was the most frustrating experience we have had in ages. We got one of the new Blitz, and the worst one… where you have to fight the giant eyeball in the center and everything feels super tanky for some reason. After running out of resurrections and only having the boss down to 2/3rds of their health… everyone abandoned and we decided to try something we thought would be easier… and ran a strike. That turned out to also be frustrating and it took us three attempts… with the final being pure spite because we lost our third party member and duo’d down the boss. The biggest problem with the encounter is the fact that the adds are so damned deadly. We had to shift up our strategy from trying to burn down the boss to being on top of the adds as soon as they spawned. It was not the cleanest kill in the world, but we were proud of not giving up.
After that we did some way more relaxing Morgran’s Hunt runs since the event is going on right now. We got quite possibly our highest score yet with a triple Maru setup, and it was a lot of stupid fun. Essentially we got to the round where the game starts to cheat in both runs. I am not sure there is a solid way to get through round eight, because the mob health and mob damage output spikes massively… throwing a bunch of yellow bar mobs at you so that you can’t easily knock out the bonus, often leading to the map ending quickly. That is okay though because we got two four key runs, which are pretty solid. Unfortunately we both got our guaranteed exotics and they were useless ones… with Ace pulling the Old Prefect and me pulling another copy of Two Tailed Fox. Essentially if we get together and do another couple four runs we will wrap up the event with several days to spare.
I finished up my hundred maps running blue altars, and during that time I got one divine altar… unfortunately being one for the boss to drop six divines instead of one for the minions to drop divines. Other than that the only other exciting altar that I got was one for exalted orbs, where I pulled three whole orbs for the entire map. There is a reason why I find myself enjoying red altars more than blue ones, because blue is a pure gamble with most of your maps giving you nothing worth writing home about. Red altars on the other hand end up producing a bunch of Chaos Orbs, which always feels at least somewhat useful. Now I need to shift gears and run one of my atlas trees that can splash in the red altar nodes so I can start grinding out my hundred maps for that.
This has led me to go back to my Alva farming setup with Ritual as I continue my hunt for King of the Mists invitations. I am running the really expensive scarab that makes it so that the last Invasion of each map drops a fully itemized temple. In my experience you end up getting quite a few temples to drop with Locus of corruption, each of which sells for around 100 Chaos, so if you get 3 of these in 20 maps you can pay for the cost of all of the scarabs required for this run. It also is worth quite a bit of experience and should be a good way of pushing up my Ice Trapper in levels. However to make Red Altars viable I think I am going to drop my anti-bleed pantheon and swap over to the one that makes it so burning ground does not hurt me, since you encounter so many burning ground altars.
In other news, my second big splurge should be here shortly. I ordered a Bambu Labs P1S with AMS combo and in theory I should be playing with it within the next week or so. A lot of the work that I have been doing out in my garage has been preparing for the ability to pick up a 3D printer and dive into that world. I have a bunch of things that I want to make and will probably talk about them some on this blog in the coming months. I mostly went with the Bambu Labs option because it seemed the most turnkey and beginner friendly. At some point I would like to also add a Resin printer to my mix, but for the moment I am getting started with what seems to have the lower barrier of entry and FDM with PLA and ABS. ABS really appeals to me becasuse of the ability to use the same plastic cement and sprue-glue that I am used to from plastic miniature kits. I will probably print more stuff in PLA however just for the ease of setup. I stayed out of this world not due to lack of interest, but more that I was waiting for things to stabilize a bit before buying something. We will see how this goes.
In other other news… I am doing considerably better and thanks for the warm wishes from folks over the last few days.
The post Stubbornness Prevails appeared first on Tales of the Aggronaut.
